Science commentary · 2026-10-12 · Updated 2026-11-13
Labdoor vs Consumer Reports: how two protein heavy-metal tests differ (2026)
Consumer Reports and Labdoor both publish heavy-metal results for protein powders, but they use different lots, limits and reporting rules. Here's how to read each, why Below LOQ isn't zero, and how we combine them.




Most protein powder heavy-metal numbers online trace back to Consumer Reports (CR), which buys products anonymously and publishes its own lab results [1], or Labdoor, which publishes product-by-product reviews with measured lead, cadmium, arsenic and mercury [4]. They measure, report and judge results differently, so a "pass" in one isn't a "pass" in the other. Here's how each works, and how we combine them on our rankings. This is general information, not medical advice.
The short answer
- Consumer Reports tests named products from several lots, averages the results, and compares one serving a day against a very strict lead benchmark: 0.5 µg per day, based on California's Prop 65 maximum allowable dose level (MADL) [9].
- Labdoor publishes a dated test result for each product and shows it next to USP limits: 5 µg/day for lead, 5 µg for cadmium, 15 µg for arsenic and 15 µg for mercury [6]. When a metal is too low to measure precisely, it reports "Below LOQ" (limit of quantitation).
- The lead benchmarks differ by about 10x. A product can sit comfortably inside Labdoor's USP comparison and still land above CR's level of concern.
- Below LOQ doesn't mean zero. It means the lab couldn't put a reliable number on it in that run.
Our lab-verified picks

10.0/10 safety
COAMomentous
Essential Grass-Fed Whey Protein Isolate
Vanilla · 25 g serving
Best for · Joint lowest heavy metals of 34 rated
Lead: too small to measure
20 g protein per scoop · Complete protein
$69.99 · updated 22 Nov
Lab details & evidence ▾
Heavy metals
µg/serving · independent test, not scored. ND = not detected; below LOQ = too small to measure; iAs = inorganic arsenic.
Metals score 10.0/10 · measured against Prop 65 (California's daily safe limit)
Protein quality
Complete
- Protein:
- Whey protein isolate (grass-fed)
- Completeness:
- Complete — Whey isolate; complete (PDCAAS 1.0).
- Completeness score:
- 10.0/10 — typical value for whey protein isolate (DIAAS 1.09, Rutherfurd et al. 2015, J Nutr 145:372)
Sources
- Independent test (not scored):
- Brand-published COA (heavy metals by ICP-MS, SGS) · checked 2026-10-29
- Evidence:
- Current Momentous whey isolate (sold as Essential Whey / Grass-Fed Whey Protein Isolate, in stock on livemomentous.com and Amazon B09F1SWMFG, Vanilla, checked 29 Oct 2026). Momentous COA Vanilla lot 0309B6 (mfg 7 Apr 2026, tested 20 Apr 2026): lead, cadmium, arsenic and mercury all <0.250 µg per 25 g scoop (below reporting limit; not quantified ≠ zero). Unflavored lot 0241H6A (Light Labs, 1 Sep 2026): Pb <0.050, Cd <0.003, Hg <0.020, As 0.050 µg per 23.7 g scoop. Distinct from the CR-tested Momentous Whey Protein Isolate Vanilla (26.5 g serving) that Momentous told CR was discontinued; that entry stays in the archive.

10.0/10 safety
COAPuori
PW1 Grass-Fed Whey Protein
Bourbon Vanilla · 30 g serving
Best for · Joint lowest heavy metals of 34 rated
Lead: too small to measure
21 g protein per scoop · Complete protein
$79.00 · updated 22 Nov
Lab details & evidence ▾
Heavy metals
µg/serving · independent test, not scored. ND = not detected; below LOQ = too small to measure; iAs = inorganic arsenic.
Metals score 10.0/10 · measured against Prop 65 (California's daily safe limit)
Brand-published test: Puori-published Clean Label Project COA, Bourbon Vanilla batch BO254497 (Ellipse Analytics, 17 Sep 2026): Pb, Cd, As, Hg all ND per 30 g serving (counted as 0).
Protein quality
Complete
- Protein:
- Whey protein concentrate (pasture-raised)
- Completeness:
- Complete — Whey protein concentrate; complete amino acid profile.
- Completeness score:
- 10.0/10 — typical value for whey protein isolate (DIAAS 1.09, Rutherfurd et al. 2015, J Nutr 145:372)
Sources
- Independent test (not scored):
- Clean Label Project certification COA (Ellipse Analytics), published by Puori · checked 2026-10-26
- Evidence:
- Puori publishes a Clean Label Project certification COA for every PW1 batch. Bourbon Vanilla batch BO254497 (Ellipse Analytics, 17 Sep 2026): lead, cadmium, arsenic and mercury all ND (µg/serving); protein 20.21 g measured vs 21 g claimed. The newest batches (BO254494–BO254497 Vanilla, 260828A Dark Chocolate, Oct 2026) are also all ND. The COA does not state detection limits; ND ≠ zero. 30 g serving per Puori's amino-acid panel. Buy link (2026-11-07): Puori partner URL https://puori.com/SFKDMGMV (replaces Amazon ASIN B0736B62K5 on cards). No Consumer Reports or Labdoor test.

10.0/10 safety
ICP-MSEquip Foods
Prime Protein
Chocolate · 25.7 g serving
Best for · Top 3 lowest heavy metals of 34 rated
Lead: 0.71 µg per scoop — above the daily safe limit
21 g protein per scoop · Not quite complete (a bit low in methionine + cysteine)
$63.99 · updated 22 Nov
$3.05 / 30 g protein
Lab details & evidence ▾
Heavy metals
µg/serving · independent test, not scored. ND = not detected; below LOQ = too small to measure; iAs = inorganic arsenic.
Metals score 10.0/10 · measured against Prop 65 (California's daily safe limit)
Protein quality
Incomplete by brand amino-acid profile (collagen-rich beef)
- Limiting amino acid:
- Methionine + cysteine (brand data); tryptophan in published beef-protein studies
- Metric:
- DIAAS 0.81 (DIAAS/PDCAAS are lab scores for protein quality; 1.0 is the top)
- Rich in:
- Glycine 5 g, proline 3 g, hydroxyproline 2.55 g per serving — collagen-rich (brand data)
- Low in:
- Methionine + cysteine (0.26 g/serving), isoleucine, tryptophan and leucine below WHO adult reference per gram of protein (calculated from brand data)
Source: Brand data (amino-acid profile in brand FAQ) + score uses typical beef protein value (published studies) · score basis: Typical for bovine muscle protein (published studies: DIAAS 0.81, Bindari et al. 2018)
- Protein:
- Beef protein isolate
- Completeness:
- Depends on formula — Animal source, but beef protein isolates are collagen-rich and can be low in tryptophan; no public PDCAAS/DIAAS for this product.
- Completeness score:
- 8.1/10 — typical value for bovine muscle hydrolysate (DIAAS 0.81, Bindari et al. 2018, J Sci Food Agric 98:2131)
Sources
- Independent test (not scored):
- Consumer Reports ICP-MS (AOAC 2015.01) · checked 2025-10-14
- Evidence:
- Average of lots purchased Nov 2024–Jan 2025; µg per labeled serving. Mercury reported at approximately zero. Brand data (2026-10-29): Equip's Light Labs report (app.lightlabs.com/comprehensive-testing-report/10/13, Prime Protein Chocolate, heavy metals last tested 6 Mar 2026) shows arsenic <0.29 µg, cadmium <1.67 µg, lead <0.24 µg and mercury not detected per serving (reported as '<' values). Earlier Sept 2025 Chocolate lot: lead 11.15 ppb (≈0.29 µg). Consumer Reports' independent average (0.71 µg lead, 142% of 0.5 µg) is shown but not scored.
- Price:
- ≈ $2.20/serving · 9.5 g protein per $ (approx., verify at checkout)
How Consumer Reports tests protein powder
CR's October 2025 investigation covered 23 protein powders and ready-to-drink shakes [1]. Its methodology sheet sets out the method [2]:
- Anonymous purchases across lots. CR bought two or three unique samples of each product between November 2024 and January 2025, from New York stores and online retailers.
- Blind-coded samples went to an independent, accredited lab.
- Triple quadrupole ICP-MS (inductively coupled plasma mass spectrometry) measured lead, cadmium, total arsenic and mercury under AOAC Method 2015.01. A subset with higher arsenic got speciation testing to separate inorganic from organic arsenic.
- Protein was measured by the Dumas method (AOAC 968.06).
- Per-serving results were averaged across samples and compared with CR's levels of concern, assuming one serving a day.
CR's benchmarks
CR uses California's Prop 65 MADLs as its levels of concern: 0.5 µg/day for lead and 4.1 µg/day for cadmium [9]. For inorganic arsenic it uses the EPA reference dose. CR says it picked these because they are "the most protective" standards available.
CR also says plainly that no Prop 65 compliance judgments can be made from its findings. Prop 65 factors in average exposure over time. CR simply assumes one labeled serving every day.
How CR handles "not detected"
This detail matters when you compare sources. If a metal turned up in any of a product's samples, CR counted the non-detect samples at half the method detection limit. If it didn't turn up in any sample, CR recorded zero for that product. That's why some CR results on our site read ND.
What CR found
About 70% of the products contained more than 120% of CR's lead level of concern in a single serving. Plant-based products averaged about nine times the lead of dairy-based ones [1]. CR's January 2026 follow-up tested five more chocolate powders readers had asked about. Four came in below 0.5 µg, and Ritual measured 0.53 µg [3]. We covered that in Consumer Reports 2026 follow-up: five low-lead protein powders.
Not everyone accepts CR's benchmark. The Council for Responsible Nutrition, a supplement trade group, told CR its lead threshold "creates a misleading impression of risk," arguing that exceeding CR's self-imposed threshold is not the same as exceeding a government safety limit. We use it because it's the most protective public yardstick, and our badges label it as CR's level.
How Labdoor reports results
Each Labdoor review page shows a "Tested" date, protein found vs. claimed, and each heavy metal in µg per serving, next to a USP limit. Two of our top-ranked wheys show what that looks like:
- [Transparent Labs 100% Grass-Fed Whey Protein Isolate](https://labdoor.com/review/transparent-labs-100-grass-fed-whey-protein-isolate) (tested 7 Aug 2026): lead 0.16 µg, arsenic 0.1 µg, cadmium 0.35 µg per serving, mercury below LOQ; 28.12 g protein found vs 28 g claimed [7].
- [Legion Whey+](https://labdoor.com/review/legion-whey-protein-powder) (tested 6 Mar 2026): lead, arsenic, cadmium and mercury all Below LOQ; 22.5 g protein found vs 22 g claimed [8].
Labdoor's scoring page says its Product Purity score is mostly based on heavy-metal assays [5]. Where possible, results are compared with health-based guidance such as Prop 65 MADLs, EPA reference doses and ATSDR minimal risk levels. The overall 0–100 score also weighs label accuracy, nutritional value, ingredient safety and projected efficacy. So a high Labdoor score isn't a heavy-metal score on its own.
Labdoor also runs a certification program that brands apply to. Its purity limits are the USP figures: 5 µg lead, 15 µg arsenic, 5 µg cadmium and 15 µg mercury per serving [6]. Protein powders are tested as-is, not on a dry-weight basis.
Five differences that change how you read the numbers
1. The lead yardstick is about 10x apart
CR flags lead above 0.5 µg/day. Labdoor's pages show a USP limit of 5 µg/day. A powder at 2 µg per serving is well inside the USP figure, but at 400% of CR's level of concern. When a brand says it "passes heavy-metal testing," ask: passes against which limit?
2. Several lots vs. one dated result
CR averaged two or three lots per product, bought over a few months. Each Labdoor page we cite shows one test date, and in several cases one named lot. Neither is a guarantee for the tub you buy, since lots vary. But a multi-lot average and a single result carry different weight.
3. "ND" and "Below LOQ" are not the same claim
- Detection limit (LOD/MDL): the lowest level at which a lab can tell a metal is present at all.
- Quantitation limit (LOQ): the lowest level at which it can report a reliable number. It sits above the detection limit.
A metal can be present but below the LOQ. "Below LOQ" means *low, but not measured precisely*, not *absent*. CR's "ND" means not detected in any sample, with zero recorded. Different methods and labs have different limits, so two "clean" readings from different sources aren't exactly equivalent.
4. Same brand, different product
Brands often appear in both sources, but rarely the same product. CR tested Transparent Labs Mass Gainer (0.43 µg lead in a 194 g serving). Labdoor tested Transparent Labs Grass-Fed Whey Protein Isolate (0.16 µg). Those are different formulas with different serving sizes. We list them separately and never carry one product's result over to another.
5. Serving size drives exposure
Both sources report per labeled serving, which is what you actually swallow. But servings range from about 25 g to over 300 g for mass gainers. Two scoops a day doubles exposure. CR's best-picks list gives daily serving limits for exactly this reason. Our mass gainer guide explains why big servings change the picture.
How we combine the two on our rankings
Rather than pretend the methods match, we do this:
- Every product card names its source, either "Consumer Reports lab test" or "Labdoor COA review", with a link and the test date.
- We never invent or convert numbers. If a source says Below LOQ, we show "<LOQ". If it says ND, we show "ND".
- Non-quantified results sort ahead of measured ones, with a visible "Lead below LOQ" or "Lead not detected" badge so you can see which is which.
- Within measured results, we rank by lowest lead first, then cadmium, inorganic (or total) arsenic and mercury. Protein completeness is a separate axis.
- Badges use CR's thresholds (0.5 µg lead, 4.1 µg cadmium) for every product, whatever the source, so the "above concern" flag means the same thing everywhere.
- Only in-stock products get buy links. Discontinued or unverified products stay in the archive as evidence.
For the full background on the thresholds, see Prop 65, FDA interim reference levels, and how we interpret µg/serving.
What about Prop 65 notices?
You may see protein powders named in California Prop 65 60-day notices (2026 filings name products such as BetterAlt pea protein). Those are allegations that a product needs a warning label, filed by private enforcers. They aren't published lab tables we can verify, so they don't change our rankings. We add a product only when CR or a Labdoor review publishes its per-serving results.
How to use this when you shop
- Check the source and date on any heavy-metal claim. Named lab, named product, recent date.
- Ask which limit it's measured against. "Passes USP" and "below CR's level of concern" are very different bars for lead.
- Treat "Below LOQ" as very low, not zero. It's a strong result, just not a zero.
- Compare µg per serving, then multiply by how many servings you actually use.
- Prefer brands that publish lot-level COAs, and match the lot number on your tub when you can.
- Start with the shortlist. Our shop lists only in-stock products, ranked lowest lead first. Affiliate status never changes rank.
FAQ
Is Labdoor or Consumer Reports more reliable?
Both rely on ICP-MS testing, the standard method for trace metals. CR's strengths are anonymous multi-lot buying and a very protective benchmark. Labdoor's strengths are breadth and more recent, dated results for many products. We use both and label which is which.
Why does Labdoor say "pass" when CR says a similar product is high in lead?
Usually it's the benchmark. Labdoor shows USP limits (5 µg lead per day). CR uses 0.5 µg per day. A result between the two passes one and fails the other.
Does "Below LOQ" mean there's no lead?
No. It means lead was below the level the lab could measure reliably in that test. It's a very good result, but not proof of zero.
Can I compare a Labdoor number directly with a CR number?
With care. Both are µg per labeled serving, so the units match. But labs, lots, dates and limits differ. Treat small differences (say, 0.16 vs 0.23 µg) as roughly equal, not a strict order.
Which protein powders look best across both sources?
On current data, dairy wheys lead. Legion Whey+ and the Muscle Feast whey range were below LOQ for all four metals at Labdoor. Transparent Labs WPI measured 0.16 µg lead, and in CR's testing BSN Syntha-6 measured 0.23 µg and Optimum Nutrition Gold Standard 0.27 µg. See the full order on our rankings.
Values are µg per labeled serving from Consumer Reports (Oct 2025 and Jan 2026) and Labdoor reviews (dates on each product). Methods and lots differ. As an Amazon Associate I earn from qualifying purchases.
References
- Consumer Reports. Protein powders and shakes contain high levels of lead (October 2025)
- Consumer Reports. Protein powders and shakes methodology and test results (PDF)
- Consumer Reports. These five protein powders had low lead levels (January 2026)
- Labdoor
- Labdoor. How we score
- Labdoor. Certification standards
- Labdoor. Transparent Labs 100% Grass-Fed Whey Protein Isolate review
- Labdoor. Legion Whey+ review
- California OEHHA. Current Proposition 65 No Significant Risk Levels and Maximum Allowable Dose Levels
Related articles
Is grass-fed whey lower in heavy metals? What the lab data shows (2026)
2026-10-21
Grass-fed whey can have low heavy-metal readings, but the label is not a contaminant standard. Labdoor found lead below its limit of quantification in the grass-fed wheys we list except Transparent Labs isolate, at 0.16 µg per serving. Consumer Reports also measured conventional wheys below its 0.5 µg/day lead concern level. Different labs, lots and flavours prevent a like-for-like comparison; choose published results rather than the sourcing claim.
7 protein powder myths about heavy metals (and what the data say)
2026-11-09
Organic, 'third-party tested', grass-fed, chocolate, price, plant-vs-whey and 'lead is only in plant' myths checked against Consumer Reports, Clean Label Project and our rankings — each with a deep-dive link.
UK and EU heavy metal limits for supplements: what applies to protein powder
2026-11-08
EU Regulation 2023/915 and GB assimilated 1881/2006 set lead, cadmium and mercury ceilings for food supplements in mg/kg. How those convert to µg per scoop, how they compare with Prop 65, and a UK buyer checklist.
As an Amazon Associate I earn from qualifying purchases. Affiliate status never changes rank. 0 paid placements.